top of page

The setup of...

Maas

New Zealand

Which device model did you choose?

Emerson ANALOG

Why did you make this choice and what were your expectations?

J'ai lu l’article de Fairaudio à propos de l’Emerson DIGITAL et j'ai pensé que l’Emerson ANALOG correspondrait plus à mes attentes, étant donné que je soupçonnais le DAC de mon intégré AVM d'être un goulet d'étranglement pour le son depuis un certain temps. Je suis allé sur le site web de Wattson Audio, juste à temps pour le concours de Noël 2021... Et maintenant j'ai le premier Emerson en Nouvelle Zélande!

I read about the Emerson DIGITAL on Fairaudio, and thought that the ANALOG would actually tick more of my boxes, seeing that I suspected the built in DAC of my AVM integrated as a bottleneck for the sound for some time. I went on the Wattson Audio website, and it happened to be on time for the 2021 Christmas give away... And now I have the first Emerson in New Zealand!

What setup did you organize around our product?

Amplificateur intégré AVM A5.2. Il a la carte DAC installée, mais je ne l'utilise plus que pour la télévision et les CDs lus depuis mon OPPO 203, car la solution de streaming et le DAC de l'Emerson sont beaucoup plus robustes et fluides dans leur présentation. Nous sommes récemment passés de nos anciennes enceintes Naim Credo aux tours Theophany Psuche SE. Le câblage entre le DAC et l'AVM est du HiDiamond, avec des câbles LS de Phonosophie. J'ai mis à niveau le PS du DAC avec Ifi IpowerX, bien que je ne sois pas sûr que cela fasse une grande différence. La source analogique est un Thorens 125 reconstruit par Schopper Audio, de l’époque où l’on vivait en Suisse, avec un bras SME 3009 et une cellule Ortofon 2M blue dans le Trigon Vanguard Phono Pre-amp.

AVM A5.2 Integrated amp. This has the DAC card installed, but I only use this now for TV and CDs played back from my OPPO 203, as the streaming solution and the DAC of the Emerson are much more solid and fluid in their presentation. We recently upgraded to Theophany Psuche SE towers from previous Naim Credo speakers. Cabling is HiDiamond between the DAC and AVM, with Phonosophie LS cables. I've upgraded the PS of the DAC to Ifi IpowerX, although I'm not sure this made a big difference. The analog front end is a Thorens 125 rebuilt by Schopper Audio, from back when we also lived in Switzerland, with an SME 3009 arm and an Ortofon 2M blue cartridge into the Trigon Vanguard Phono Pre-amp.

What are the results?

Comme mentionné ci-dessus : beaucoup plus de robustesse et de fluidité par rapport à l'ancienne solution numérique. Les gains les plus importants se situent probablement au niveau des basses et des médiums, avec également une nette amélioration du PRAT (Pace, Rythm and Timing) - la musique semble plus riche ET plus rapide, ce qui a été un peu surprenant. Il est intéressant de noter que l'augmentation du gain à l'entrée de l'ampli améliore encore les choses.

Like mentioned above: much improved solidity and fluidity over the previous digital front end. The biggest gains are probably around the bass and mids, with also clearly improved PRAT (Pace, Rythm and Timing) - music sounds more solid AND faster, which came as a bit of a surprise. Interestingly increasing the gain on the input at the amp makes things better still.

What else?

For me the Qobuz integration in the app doesn't work on the iPhone, although it's rock solid on the iPad. Playing back directly from the Wattson app is slightly better sounding than Audirvana from my MacBook pro via UPnP, although this adds gapless playback...

bottom of page